A series of 6 sets of midwater trawls in Prydz Bay. Each trawl set took place over a 24 hour period to test the extent of diurnal vertical migration in P. antarcticum. Part of the KROCK cruise of Aurora Australis. These data have been incorporated into an 'historical fish database' available for download at the URL given below (Access Database). These data have also been included in the Australian Antarctic Data Centre's Biodiversity database, and have been submitted to GBIF and OBIS (Global Biodiversity Information Facility, and Ocean Biogeographic Information System). The fields in this dataset are: Species Cruise Start Date End Date Sampling Date Vessel Name Fishing Area Latitude Longitude Gear Length Weight Sex Gonad Weight Stomach Weight

Untreated, macerated wastewater effluent has been discharged to the sea at Davis Station since 2005, when the old wastewater treatment infrastructure was removed. This environmental assessment was instigated to guide the choice of the most suitable wastewater treatment facility at Davis. The assessment will support decisions that enable Australia to meet the standards set for the discharge of wastewaters in Antarctica in national legislation (Waste Management Regulations of the Antarctic Treaty Environmental Protection Act - ATEP) and to meet international commitments (the Madrid Protocol) and to meet Australia's aspirations to be a leader in Antarctic environmental protection. The overall objective was to provide environmental information in support of an operational infrastructure project to upgrade wastewater treatment at Davis. This information is required to ensure that the upgrade satisfies national legislation (ATEP/Waste Management Regulations), international commitments (the Madrid Protocol) and maintain the AAD's status as an international leader in environmental management. The specific objectives were to: 1. Wastewater properties: Determine the properties of discharged wastewater (contaminant levels, toxicity, microbiological hazards) as the basis for recommendations on the required level of treatment and provide further consideration of what might constitute adequate dilution and dispersal for discharge to the nearshore marine environment 2. Dispersal and dilution characteristics of marine environment: Assess the dispersing characteristics of the immediate nearshore marine environment in the vicinity of Davis Station to determine whether conditions at the existing site of effluent discharge are adequate to meet the ATEP requirement of initial dilution and rapid dispersal. 3. Environmental impacts: Describe the nature and extent of impacts to the marine environment associated with present wastewater discharge practices at Davis and determine whether wastewater discharge practices have adversely affected the local environment. 4. Evaluate treatment options: Evaluate the different levels of treatment required to mitigate and/or prevent various environmental impacts and reduce environmental risks.

Untreated, macerated wastewater effluent has been discharged to the sea at Davis Station since 2005, when the old wastewater treatment infrastructure was removed. This environmental assessment was instigated to guide the choice of the most suitable wastewater treatment facility at Davis. The assessment will support decisions that enable Australia to meet the standards set for the discharge of wastewaters in Antarctica in national legislation (Waste Management Regulations of the Antarctic Treaty Environmental Protection Act - ATEP) and to meet international commitments (the Madrid Protocol) and to meet Australia's aspirations to be a leader in Antarctic environmental protection. The overall objective was to provide environmental information in support of an operational infrastructure project to upgrade wastewater treatment at Davis. This information is required to ensure that the upgrade satisfies national legislation (ATEP/Waste Management Regulations), international commitments (the Madrid Protocol) and maintain the AAD's status as an international leader in environmental management. The specific objectives were to: 1. Wastewater properties: Determine the properties of discharged wastewater (contaminant levels, toxicity, microbiological hazards) as the basis for recommendations on the required level of treatment and provide further consideration of what might constitute adequate dilution and dispersal for discharge to the nearshore marine environment 2. Dispersal and dilution characteristics of marine environment: Assess the dispersing characteristics of the immediate nearshore marine environment in the vicinity of Davis Station to determine whether conditions at the existing site of effluent discharge are adequate to meet the ATEP requirement of initial dilution and rapid dispersal. 3. Environmental impacts: Describe the nature and extent of impacts to the marine environment associated with present wastewater discharge practices at Davis and determine whether wastewater discharge practices have adversely affected the local environment. 4. Evaluate treatment options: Evaluate the different levels of treatment required to mitigate and/or prevent various environmental impacts and reduce environmental risks.

During the K-Axis marine voyage from mid Jan-late Feb 2016, a diverse range of sampling techniques were employed to collect specimens and data. Each sampling event was recorded by scientists and technical support staff in a logbook that was kept in the operations room on board the Aurora Australis. This is a PDF of the scanned original document, compiled on paper during the voyage. event_number: A unique event identifier in the log, in the order that the events were written down (usually but not always chronologically) event_type: The code defined and used by each research project to identify the types of equipment deployed or samples collected for an event. event_type_prefix: A non-mandatory prefix field used by some research projects to identify the type of an event event_type_number: A sequential number or alphanumeric-number combination defined and used by each research project to identify unique equipment deployment or sample collection events station_number: A universal (voyage-wide) station number used across all projects to identify a nominal lat/lon position defined during voyage planning leg: A nominally straight-line section of the voyage track defined during voyage planning. The voyage track was planned as a series of roughly N-S and E-W transects that intersected in some locations. Legs start at a station and continue through more stations to a vertex-station which is the start of the next leg. Legs are numbered consecutively. waypoint: A GPS waypoint used by Aurora Australis crew, AAD science technical support and researchers to identify target lat/lon positions in the voyage. Some waypoints correspond with station numbers. start_date_utc: The start date of the event in UTC start_time_utc: The start time of the event in UTC start_lat_deg: The latitude (whole degrees) of the vessel at the beginning of the event start_lat_min: The latitude (minutes) of the vessel at the beginning of the event start_lat_dec_deg: The latitude (decimal degrees) of the vessel at the beginning of the event start_lon_deg: The longitude (whole degrees) of the vessel at the beginning of the event start_lon_min: The longitude (minutes) of the vessel at the beginning of the event start_lon_dec_deg: The longitude (decimal degrees) of the vessel at the beginning of the event end_date_utc: The end date of the event in UTC end_time_utc: The end time of the event in UTC end_lat_deg: The latitude (whole degrees) of the vessel at the end of the event end_lat_min: The latitude (minutes) of the vessel at the end of the event end_lat_dec_deg: The latitude (decimal degrees) of the vessel at the end of the event end_lon_deg: The longitude (whole degrees) of the vessel at the end of the event end_lon_min: The longitude (minutes) of the vessel at the end of the event end_lon_dec_deg: The longitude (decimal degrees) of the vessel at the end of the event remarks: Comments/remarks written by researchers when completing the paper log

During the K-Axis marine voyage from mid Jan-late Feb 2016, a diverse range of sampling techniques were employed to collect specimens and data. Each sampling event was recorded by scientists and technical support staff in a logbook that was kept in the operations room on board the Aurora Australis. This is a direct digital copy/transcription of the paper logbook. event_number: A unique event identifier in the log, in the order that the events were written down (usually but not always chronologically) event_type: The code defined and used by each research project to identify the types of equipment deployed or samples collected for an event. event_type_prefix: A non-mandatory prefix field used by some research projects to identify the type of an event event_type_number: A sequential number or alphanumeric-number combination defined and used by each research project to identify unique equipment deployment or sample collection events station_number: A universal (voyage-wide) station number used across all projects to identify a nominal lat/lon position defined during voyage planning leg: A nominally straight-line section of the voyage track defined during voyage planning. The voyage track was planned as a series of roughly N-S and E-W transects that intersected in some locations. Legs start at a station and continue through more stations to a vertex-station which is the start of the next leg. Legs are numbered consecutively. waypoint: A GPS waypoint used by Aurora Australis crew, AAD science technical support and researchers to identify target lat/lon positions in the voyage. Some waypoints correspond with station numbers. start_date_utc: The start date of the event in UTC start_time_utc: The start time of the event in UTC start_lat_deg: The latitude (whole degrees) of the vessel at the beginning of the event start_lat_min: The latitude (minutes) of the vessel at the beginning of the event start_lat_dec_deg: The latitude (decimal degrees) of the vessel at the beginning of the event start_lon_deg: The longitude (whole degrees) of the vessel at the beginning of the event start_lon_min: The longitude (minutes) of the vessel at the beginning of the event start_lon_dec_deg: The longitude (decimal degrees) of the vessel at the beginning of the event end_date_utc: The end date of the event in UTC end_time_utc: The end time of the event in UTC end_lat_deg: The latitude (whole degrees) of the vessel at the end of the event end_lat_min: The latitude (minutes) of the vessel at the end of the event end_lat_dec_deg: The latitude (decimal degrees) of the vessel at the end of the event end_lon_deg: The longitude (whole degrees) of the vessel at the end of the event end_lon_min: The longitude (minutes) of the vessel at the end of the event end_lon_dec_deg: The longitude (decimal degrees) of the vessel at the end of the event remarks: Comments/remarks written by researchers when completing the paper log transcribe_comments: Comments/remarks made by the transcriber when the log was digitised

During the K-Axis marine voyage from mid Jan-late Feb 2016, a diverse range of sampling techniques were employed to collect specimens and data. Each sampling event was recorded by scientists and technical support staff in a logbook that was kept in the operations room on board the Aurora Australis. This is a direct digital transcription of the paper logbook with interpolated lat/lon from underway data to supplement start times as recorded in the log. The method used to obtain the supplementary position is described in the associated eventlog_matchup.html file. event_number: A unique event identifier in the log, in the order that the events were written down (usually but not always chronologically) event_type: The code defined and used by each research project to identify the types of equipment deployed or samples collected for an event. event_type_prefix: A non-mandatory prefix field used by some research projects to identify the type of an event event_type_number: A sequential number or alphanumeric-number combination defined and used by each research project to identify unique equipment deployment or sample collection events station_number: A universal (voyage-wide) station number used across all projects to identify a nominal lat/lon position defined during voyage planning leg: A nominally straight-line section of the voyage track defined during voyage planning. The voyage track was planned as a series of roughly N-S and E-W transects that intersected in some locations. Legs start at a station and continue through more stations to a vertex-station which is the start of the next leg. Legs are numbered consecutively. waypoint: A GPS waypoint used by Aurora Australis crew, AAD science technical support and researchers to identify target lat/lon positions in the voyage. Some waypoints correspond with station numbers. start_date_utc: The start date of the event in UTC start_time_utc: The start time of the event in UTC start_lat_deg: The latitude (whole degrees) of the vessel at the beginning of the event start_lat_min: The latitude (minutes) of the vessel at the beginning of the event start_lat_dec_deg: The latitude (decimal degrees) of the vessel at the beginning of the event start_lon_deg: The longitude (whole degrees) of the vessel at the beginning of the event start_lon_min: The longitude (minutes) of the vessel at the beginning of the event start_lon_dec_deg: The longitude (decimal degrees) of the vessel at the beginning of the event end_date_utc: The end date of the event in UTC end_time_utc: The end time of the event in UTC end_lat_deg: The latitude (whole degrees) of the vessel at the end of the event end_lat_min: The latitude (minutes) of the vessel at the end of the event end_lat_dec_deg: The latitude (decimal degrees) of the vessel at the end of the event end_lon_deg: The longitude (whole degrees) of the vessel at the end of the event end_lon_min: The longitude (minutes) of the vessel at the end of the event end_lon_dec_deg: The longitude (decimal degrees) of the vessel at the end of the event remarks: Comments/remarks written by researchers when completing the paper log transcribe_comments: Comments/remarks made by the transcriber when the log was digitised utc: The start date and time of the event in UTC start_lon_dec_deg_interp: The latitude (decimal degrees) of the vessel at the beginning of the event interpolated from the vessel underway data start_lat_dec_deg_interp: The longitude (decimal degrees) of the vessel at the beginning of the event interpolated from the vessel underway data

The Kerguelen Axis voyage was planned to collect data to enhance the realism of end-to-end ecosystem models being developed in the Antarctic Climate and Ecosystems Cooperative Research Centre, to investigate the effects of climate change and ocean acidification on Southern Ocean ecosystems in the Indian Sector (particularly in relation to factors affecting the northern distribution of Antarctic krill) and to contribute to assessment of the spatial relationship of mesopelagic mid-trophic level species, in particular zooplanktivores, to foraging strategies by marine mammals and birds on the Kerguelen Plateau. Nine projects were undertaken aboard the Aurora Australis. Each project had individual objectives and outputs, and there are metadata records for each data set collected. They were designed to be complementary in order that the whole data set and project analyses could be used to address the objectives of the Kerguelen Axis program. Observations will be contributed to the Southern Ocean Observing System (SOOS) and will facilitate the design of future ecosystem observing in the region.

Untreated, macerated wastewater effluent has been discharged to the sea at Davis Station since 2005, when the old wastewater treatment infrastructure was removed. This environmental assessment was instigated to guide the choice of the most suitable wastewater treatment facility at Davis. The assessment will support decisions that enable Australia to meet the standards set for the discharge of wastewaters in Antarctica in national legislation (Waste Management Regulations of the Antarctic Treaty Environmental Protection Act - ATEP) and to meet international commitments (the Madrid Protocol) and to meet Australia's aspirations to be a leader in Antarctic environmental protection. The overall objective was to provide environmental information in support of an operational infrastructure project to upgrade wastewater treatment at Davis. This information is required to ensure that the upgrade satisfies national legislation (ATEP/Waste Management Regulations), international commitments (the Madrid Protocol) and maintain the AAD's status as an international leader in environmental management. The specific objectives were to: 1. Wastewater properties: Determine the properties of discharged wastewater (contaminant levels, toxicity, microbiological hazards) as the basis for recommendations on the required level of treatment and provide further consideration of what might constitute adequate dilution and dispersal for discharge to the nearshore marine environment 2. Dispersal and dilution characteristics of marine environment: Assess the dispersing characteristics of the immediate nearshore marine environment in the vicinity of Davis Station to determine whether conditions at the existing site of effluent discharge are adequate to meet the ATEP requirement of initial dilution and rapid dispersal. 3. Environmental impacts: Describe the nature and extent of impacts to the marine environment associated with present wastewater discharge practices at Davis and determine whether wastewater discharge practices have adversely affected the local environment. 4. Evaluate treatment options: Evaluate the different levels of treatment required to mitigate and/or prevent various environmental impacts and reduce environmental risks.